Sand making machine is used in sand and gravel production line and stone production line. Sand Making Machine can break soft or medium hard and extremely hard materials, and can also process and shape materials. The sand making machine has been widely used in cement, various ores, refractory materials, sands, quartzite, pebbles, limestone, calcite, glass material, mechanical building stone, bauxite clinker and gold slag, and the efficiency of the hard, hard and abrasion resistant materials such as carborundum, sintered bauxite and so on High.

The design of the accessories is unique. The sand making machine has simple structure, unique bearings and advanced spindle design, so that the machine has the characteristics of heavy load and high speed rotation.

Long service life. The wearing parts are low in wear and tear. All wearing parts are made of high quality wear resistant materials at home and abroad with long service life. A small number of easy wearing parts are made of super hard wear-resistant material, small size, light weight and easy to replace parts.

The maintenance rate is low and durable. Impeller and vortex crusher chamber material lining greatly reduces wear parts cost and maintenance workload. In the production process, the stone can form a protective bottom, and the fuselage has no wear and wear.

The performance is reliable. The sand making machine has high reliability, strict safety guarantee device, and equipment and personal safety. Smooth operation, low noise, high efficiency, energy saving and high crushing efficiency.

Maintenance of sand making machine
1. The daily maintenance of the sand making machine is very important to the normal and permanent work of the machine. It is necessary to make the sand machine get enough time to stop work and rest regularly.

2. open the observation door regularly and open the observation door to observe the internal wear of the percussive sand making machine, replace the worn parts in time, and strictly prohibit the opening of the observation door to observe the internal conditions during the working process of the sand making machine so as to avoid the danger. It is found that the impeller wear is replaced in time and repaired by the manufacturer.

3. the size of the transmission triangle belt should be adjusted properly to ensure the uniform force of the triangle belt. When the double motor is driven, the two sides of the triangle belt should be divided into groups to make the length of each group as consistent as possible.

4. the sand machine should be properly added to the grease when working to 400 hours. When working to 2000 hours, the main shaft will be cleaned and the new bearings need to be replaced when the work is 7200 hours.

Comments are closed.