The mobile Construction Waste Crusher, referred to as the construction waste crusher, is a device that uses impact energy to break medium-hard brittle materials. There are many types of mobile construction waste crushers, which are mainly divided into two categories: single-rotor construction waste crusher and double-rotor construction waste crusher. Advantages of the mobile construction waste crusher: Compared with the hammer-type construction waste crusher, the construction waste crusher has a large crushing ratio, and has a uniform product size and less powder phenomenon, low energy consumption, easy equipment manufacture and convenient maintenance; Hard rock crushing, high efficiency and energy saving; the product particle size adjustment range is large, the discharge particle size is adjustable, and the crushing process is simplified.

Mobile construction waste crusher works

The mobile Construction Waste Crusher is a crushing machine that uses impact to break up materials. When the machine is working, the rotor rotates at a high speed under the driving of the motor. When the material enters the action area of ??the hammer, it collides with the hammer on the rotor and is then thrown to the counter-attack device to be broken again, and then rebounded from the counter-attack. Returning to the hammer hammer action area, the process is repeated, and the process is repeated, and the material is broken into the counter-attack chamber from large to small, until the material is crushed to the required particle size and discharged from the discharge port. Adjusting the gap between the counter frame and the rotor can achieve the purpose of changing the material discharge size and material shape.

Mobile construction waste crusher scope

This series of mobile construction waste crusher (construction waste crusher) is a generation of mobile construction waste crusher developed by our company on the basis of absorbing domestic and foreign advanced technology and combining the specific industrial and mining conditions of domestic sand and gravel industry. It adopts the manufacturing technology, the unique structural design, the finished product is cubic, no tension and crack, the grain shape is quite good, and it can crush all kinds of coarse, medium and fine materials with the feed particle size not exceeding 500mm and the compressive strength not exceeding 350MPa. (Granite, limestone, concrete, etc.), widely used in various ore crushing, railway, highway, energy, cement, chemical, construction and other industries. The size of the discharge material can be adjusted, and the crushing specifications are diversified.

Comments are closed.